Perfect Paver Co Products

Proprietary sand and sealer systems designed to deliver better-looking, longer-lasting results

Products Developed for Peak Performance

In an industry where many products are built for mass use, we took a different approach.

After restoring thousands of patios, driveways, and pool decks across multiple climates, we saw the same issues over and over: sealers that didn’t last, sand that broke down, and results that faded too quickly.

So we developed our own products. 

Our proprietary sand and sealer systems are built from our real-world experience of restoring over 10 million square feet of outdoor surfaces. We’ve refined and tested these to perform the way paver systems should—both visually and structurally.

Explore Products

Paver Sealer

Learn More

Polymeric Sand

Learn More

Why Our Products Matter for Your Project

The products used on your pavers directly impact how they look, how long they last, and how well they hold up over time.

That’s why we don’t rely on off-the-shelf solutions, and instead built a system designed to deliver better results from the start. 

See Our Process

Wet Look Semi-Gloss Paver Sealer Designed for Pavers and Natural Stone

What It Does

This sealer enhances the natural color of your pavers while protecting them from the elements, helping your patio, driveway, or pool deck stay vibrant, clean, and consistent over time.

Why We Use It

This formulation is built from everything we’ve learned restoring pavers in real conditions, from Florida sun and rain to Midwest freeze-thaw cycles.

  • Enhances color without creating a heavy, artificial surface
  • Protects against UV fading, stains, mold, and moisture
  • Locks in joint sand for long-term stability
  • Maintains a clean, uniform appearance
  • Water-based, eco-conscious, and safe for residential environments

The Result

Your outdoor space has a cleaner, richer, more uniform look with protection that helps your pavers hold up over time.

Product Compatibility

This product is suitable for use on all pavers and most natural stone, especially surfaces receiving an anti-slip additive. It can also be used on some stamped concrete, depending on the previous sealer.

Product Specs

  • Made in USA
  • 10 GAL (37.8 L) or 5 GAL (18.9 L)
  • Averages 200–400 square feet per gallon (depends on porosity/contour of coated surface)

Recommended Uses

  • Concrete surfaces
  • Brick pavers
  • Driveways
  • Garage floors
  • Walkways
  • Patios
  • Slate
  • Saltillo/clay roof tile

Can also be used as a non-yellowing clear sealer to protect vinyl flakes. 

  • Finish: Gloss
  • Pigment Type: None
  • Vehicle Type: Acrylic Urethane
  • Solvent Type: Water
  • % Solids by Weight: 50% ± 2%
  • % Solids by Volume: 48% ± 2%
  • Density: 8.80 lbs per gallon
  • Viscosity @ 75°F (24°C): <100 cp
  • Flash Point Minimum: Not flammable
  • Flame Spread: Class A rating on non-combustible substrate

Safety Warning

CAUTION: Keep out of reach of children.

WARNING! If you scrape, sand or remove old paint, you may release lead dust. Lead is toxic. Exposure can cause serious illness, such as brain damage, especially in children. Pregnant women should also avoid exposure.

Wear an NIOSH-approved respirator to control lead exposure. Carefully clean up with a HEPA vacuum and a wet mop.

Before you start, find out how to protect yourself and your family by contacting the National Lead Information Hotline at 1-800-424-LEAD or visit www.epa.gov/lead.

Technical data contained herein is true and accurate at the date of issue but is subject to change without notice. Any INSECO representative should be contacted with questions concerning product information or application procedures.

Our products conform to INSECO quality standards, but no other warranty is expressed or implied. Liability, if any, is limited to the replacement of product or purchase price.

Where It’s Used

Patios

Driveways

Walkways

Pool Decks

Where It’s Used

Traditional Joints

False Joints

Irregular Joints

Professional-Grade Polymeric Sand For Strong, Clean, Stable Joints

What It Does

The joints between your pavers are what hold the entire system together. This sand is designed to stabilize your pavers while keeping them clean and low maintenance.

Why We Use It

Developed through thousands of restoration projects, this formulation is built to perform across all climates and conditions.

  • Minimizes weeds and joint washout
  • Maintains strong, flexible joints through seasonal changes
  • Even polymer distribution for consistent performance
  • Cleaner installation with low dust and minimal haze
  • Designed for long-term durability, not short-term appearance

The Result

Stronger joints and cleaner lines result in a more stable paver system overall. 

Our Process Makes the Difference

Our products are only part of the equation. How they’re used within our process makes all the difference. Learn more about polymeric sand →

See Our Process
Get a Free Estimate
View Resources

Frequently Asked Questions

The products used directly impact how your pavers look and how long they last. Lower-quality materials can fade, break down, or fail over time, while the right products help maintain color, stability, and overall performance.

Our products were developed through real-world restoration work—not just manufactured for general use. They’ve been tested across millions of square feet and refined based on what actually performs best over time.

Our sealer is designed to enhance your pavers’ natural color, not drastically change it. The goal is a richer, more uniform look — not an artificial or overly glossy finish.

Longevity depends on factors like sun exposure, traffic, and maintenance, but our system is designed to provide lasting protection and consistent appearance over time.

Not always. While our products are designed to perform across a wide range of projects, we choose the right approach based on your specific pavers, condition, and how the space is used.

Polymeric sand is a great solution for many projects, but not every situation is the same. In some cases, alternative methods like joint stabilizing sealers may be a better fit. We evaluate each project individually to determine the best approach.

Yes. Our systems are water-based and designed for residential environments, with proper application methods that protect surrounding areas.

Our products are primarily used as part of our professional restoration process to ensure they’re applied correctly and deliver the best results. They are currently not available for purchase. 

Skip to content